Ingest data from Kafka
This topic describes how to connect RisingWave to a Kafka broker that you want to receive data from, and how to specify data formats, schemas, and security (encryption and authentication) settings.
A source is a resource that RisingWave can read data from. You can create a source in RisingWave using the CREATE SOURCE
command. When creating a source, you can choose to persist the data from the source in RisingWave by using the CREATE TABLE
command and specifying the connection settings and data format.
Regardless of whether the data is persisted in RisingWave, you can create materialized views to perform analysis or data transformations.
RisingWave supports exactly-once semantics by reading transactional messages only when the associated transaction has been committed. This is the set behavior for RisingWave and not configurable.
RisingWave Cloud provides an intuitive guided setup for creating a Kafka source. For more information, see Create a source using guided setup in the RisingWave Cloud documentation.
Syntax
CREATE {TABLE | SOURCE} [ IF NOT EXISTS ] source_name
[ schema_definition ]
[INCLUDE { header | key | offset | partition | timestamp } [AS <column_name>]]
WITH (
connector='kafka',
connector_parameter='value', ...
)
FORMAT data_format ENCODE data_encode (
message = 'message',
schema.location = 'location' | schema.registry = 'schema_registry_url'
);
schema_definition:
(
column_name data_type [ PRIMARY KEY ], ...
[ PRIMARY KEY ( column_name, ... ) ]
)
For Avro and Protobuf data, do not specify schema_definition
in the CREATE SOURCE
statement.
RisingWave performs primary key constraint checks on tables but not on sources. If you need the checks to be performed, please create a table.
For tables with primary key constraints, if a new data record with an existing key comes in, the new record will overwrite the existing record.
Connector parameters
Field | Notes |
---|---|
topic | Required. Address of the Kafka topic. One source can only correspond to one topic. |
properties.bootstrap.server | Required. Address of the Kafka broker. Format: 'ip:port,ip:port' . |
scan.startup.mode | Optional. The offset mode that RisingWave will use to consume data. The two supported modes are earliest (earliest offset) and latest (latest offset). If not specified, the default value earliest will be used. |
scan.startup.timestamp.millis | Optional. RisingWave will start to consume data from the specified UNIX timestamp (milliseconds). If this field is specified, the value for scan.startup.mode will be ignored. |
properties.sync.call.timeout | Optional. Specify the timeout. By default, the timeout is 5 seconds. |
properties.client.id | Optional. Client ID associated with the Kafka client. |
Other parameters
Field | Notes |
---|---|
data_format | Data format. Supported formats: DEBEZIUM , MAXWELL , CANAL , UPSERT , PLAIN . |
data_encode | Data encode. Supported encodes: JSON , AVRO , PROTOBUF , CSV . |
message | Message name of the main Message in schema definition. Required for Protobuf. |
location | Web location of the schema file in http://... , https://... , or S3://... format. For Avro and Protobuf data, you must specify either a schema location or a schema registry but not both. |
schema.registry | Confluent Schema Registry URL. Example: http://127.0.0.1:8081 . For Avro or Protobuf data, you must specify either a schema location or a Confluent Schema Registry but not both. |
schema.registry.username | Conditional. User name for the schema registry. It must be specified with schema.registry.password . |
schema.registry.password | Conditional. Password for the schema registry. It must be specified with schema.registry.username . |
schema.registry.name.strategy | Optional. Accepts topic_name_strategy (default), record_name_strategy , topic_record_name_strategy . If it is set to either record_name_strategy or topic_record_name_strategy , the message parameter must also be set. It can only be specified with schema.registry. |
access_key | Required if loading descriptors from S3. The access key ID of AWS. |
secret_key | Required if loading descriptors from S3. The secret access key of AWS. |
region | Required if loading descriptors from S3. The AWS service region. |
arn | Optional. The Amazon Resource Name (ARN) of the role to assume. |
external_id | Optional. The external id used to authorize access to third-party resources. |
Additional Kafka parameters
When creating a source in RisingWave, you can specify the following Kafka parameters. To set the parameter, add the RisingWave equivalent of the Kafka parameter under the WITH options
. For an example of the usage of these parameters, see the JSON example. For additional details on these parameters, see the Configuration properties.
Kafka parameter name | RisingWave parameter name | Type |
---|---|---|
enable.auto.commit | properties.enable.auto.commit | boolean |
fetch.max.bytes | properties.fetch.max.bytes | int |
fetch.queue.backoff.ms | properties.fetch.queue.backoff.ms | int |
fetch.wait.max.ms | properties.fetch.wait.max.ms | int |
message.max.bytes | properties.message.max.bytes | int |
queued.max.messages.kbytes | properties.queued.max.messages.kbytes | int |
queued.min.messages | properties.queued.min.messages | int |
receive.message.max.bytes | properties.receive.message.max.bytes | int |
ssl.endpoint.identification.algorithm | properties.ssl.endpoint.identification.algorithm | str |
Set properties.ssl.endpoint.identification.algorithm
to none
to bypass the verification of CA certificates and resolve SSL handshake failure. This parameter can be set to either https
or none
. By default, it is https
.
Examples
Here are examples of connecting RisingWave to a Kafka broker to read data from individual topics.
RisingWave supports reading messages that have been compressed by zstd. Additional configurations are not required.
- Avro
- Upsert Avro
- JSON
- Upsert JSON
- Protobuf
- CSV
- Bytes
CREATE SOURCE IF NOT EXISTS source_abc
WITH (
connector='kafka',
topic='demo_topic',
properties.bootstrap.server='172.10.1.1:9090,172.10.1.2:9090',
scan.startup.mode='latest',
scan.startup.timestamp.millis='140000000'
) FORMAT PLAIN ENCODE AVRO (
message = 'message_name',
schema.registry = 'http://127.0.0.1:8081'
);
CREATE TABLE IF NOT EXISTS source_abc
WITH (
connector='kafka',
properties.bootstrap.server='localhost:9092',
topic='test_topic'
)
FORMAT UPSERT ENCODE AVRO (
schema.registry = 'http://127.0.0.1:8081',
schema.registry.username='your_schema_registry_username',
schema.registry.password='your_schema_registry_password'
);
CREATE SOURCE IF NOT EXISTS source_abc (
column1 varchar,
column2 integer,
)
WITH (
connector='kafka',
topic='demo_topic',
properties.bootstrap.server='172.10.1.1:9090,172.10.1.2:9090',
scan.startup.mode='latest',
scan.startup.timestamp.millis='140000000'
) FORMAT PLAIN ENCODE JSON;
The additional Kafka parameters queued.min.messages
and queued.max.messages.kbytes
are specified with properties.queued.min.messages
and properties.queued.max.messages.kbytes
, respectively, when creating the source.
CREATE SOURCE s1 (v1 int, v2 varchar) with (
connector = 'kafka',
topic = 'kafka_1_partition_topic',
properties.bootstrap.server = 'message_queue:29092',
scan.startup.mode = 'earliest',
properties.queued.min.messages = 10000,
properties.queued.max.messages.kbytes = 65536
) FORMAT PLAIN ENCODE JSON;
CREATE TABLE IF NOT EXISTS source_abc (
column1 varchar,
column2 integer,
)
WITH (
connector='kafka',
properties.bootstrap.server='localhost:9092',
topic='t1'
) FORMAT UPSERT ENCODE JSON;
CREATE SOURCE IF NOT EXISTS source_abc
WITH (
connector='kafka',
topic='demo_topic',
properties.bootstrap.server='172.10.1.1:9090,172.10.1.2:9090',
scan.startup.mode='latest',
scan.startup.timestamp.millis='140000000'
) FORMAT PLAIN ENCODE PROTOBUF (
message = 'package.message_name',
access_key = 'your_access_key',
secret_key = 'your secret_key',
location = 'https://demo_bucket_name.s3-us-west-2.amazonaws.com/demo.proto'
);
CREATE TABLE s0 (v1 int, v2 varchar)
WITH (
connector = 'kafka',
topic = 'kafka_csv_topic',
properties.bootstrap.server = '127.0.0.1:29092',
scan.startup.mode = 'earliest'
) FORMAT PLAIN ENCODE CSV (
without_header = 'true',
delimiter = ','
);
-
CSV header is not supported when creating a table with Kafka connector. Add the
without_header
option to the encode parameters. -
The
delimiter
option specifies the delimiter character used in the CSV data. Setdelimiter = E'\t'
for tab-delimited data.
CREATE SOURCE t1 (id bytea)
WITH (
connector='kafka',
topic='topic1',
properties.bootstrap.server='localhost:9093',
) FORMAT PLAIN ENCODE BYTES;
Query Kafka timestamp
For each Kafka source created, the virtual column, _rw_kafka_timestamp
, will also exist. This column includes the timestamp of the Kafka message.
You can include this column in your views or materialized views to display the Kafka timestamp. Here is an example.
CREATE MATERIALIZED VIEW v1 AS
SELECT _rw_kafka_timestamp, col1
FROM source_name;
If directly querying from the source, you can use _rw_kafka_timestamp
to filter messages sent within a specific time period. For example, the following query only selects messages sent in the past 10 minutes.
SELECT * FROM source_name
WHERE _rw_kafka_timestamp > now() - interval '10 minute';
Read schemas from locations
RisingWave supports reading schemas from a Web location in http://...
, https://...
, or S3://...
format, or a Confluent Schema Registry for Kafka data in Avro or Protobuf format.
For Protobuf, if a schema location is specified, the schema file must be a FileDescriptorSet
, which can be compiled from a .proto
file with a command like this:
protoc -I=$include_path --include_imports --descriptor_set_out=schema.pb schema.proto
To specify a schema location, add this clause to a CREATE SOURCE
statement.
ENCODE data_encode (
schema.location = 'location'
)
If a primary key also needs to be defined, use the table constraint syntax.
CREATE TABLE table1 (PRIMARY KEY(id))
Read schemas from Schema Registry
Confluent Schema Registry provides a serving layer for your metadata. It provides a RESTful interface for storing and retrieving your schemas.
RisingWave supports reading schemas from a Schema Registry. The latest schema will be retrieved from the specified Schema Registry using the TopicNameStrategy
strategy when the CREATE SOURCE
statement is issued. Then the schema parser in RisingWave will automatically determine the columns and data types to use in the source.
To specify the Schema Registry, add this clause to a CREATE SOURCE
statement.
ENCODE data_encode (
schema.registry = 'schema_registry_url'
)
To learn more about Confluent Schema Registry and how to set up a Schema Registry, refer to the Confluent Schema Registry documentation.
If a primary key also needs to be defined, use the table constraint syntax.
CREATE TABLE table1 (PRIMARY KEY(id))
Schema evolution
Based on the compatibility type that is configured for the schema registry, some changes are allowed without changing the schema to a different version. In this case, RisingWave will continue using the original schema definition. To use a newer version of the writer schema in RisingWave, you need to drop and recreate the source.
To learn about compatibility types for Schema Registry and the changes allowed, see Compatibility Types.
Create source with VPC connection
If your Kafka source service is located in a different VPC from RisingWave, use AWS PrivateLink to establish a secure and direct connection. For details on how to set up an AWS PrivateLink connection, see Create an AWS PrivateLink connection.
To create a Kafka source with a VPC connection, in the WITH section of your CREATE SOURCE
or CREATE TABLE
statement, specify the following parameters.
Parameter | Notes |
---|---|
privatelink.targets | The PrivateLink targets that correspond to the Kafka brokers. The targets should be in JSON format. Note that each target listed corresponds to each broker specified in the properties.bootstrap.server field. If the order is incorrect, there will be connectivity issues. |
privatelink.endpoint | The DNS name of the VPC endpoint. If you're using RisingWave Cloud, you can find the auto-generated endpoint after you created a connection. See details in Create a VPC connection. |
connection.name | The name of the connection. This parameter should only be included if you are using a connection created with the CREATE CONNECTION statement. Omit this parameter if you have provisioned a VPC endpoint using privatelink.endpoint (recommended). |
Here is an example of creating a Kafka source using a PrivateLink connection. Notice that {"port": 9094}
corresponds to the broker broker1-endpoint
, {"port": 9095}
corresponds to the broker broker2-endpoint
, and {"port": 9096}
corresponds to the broker broker3-endpoint
.
CREATE TABLE IF NOT EXISTS crypto_source (
product_id VARCHAR,
price NUMERIC,
open_24h NUMERIC,
volume_24h NUMERIC,
low_24h NUMERIC,
high_24h NUMERIC,
volume_30d NUMERIC,
best_bid NUMERIC,
best_ask NUMERIC,
side VARCHAR,
time timestamp,
trade_id bigint,
)
WITH (
connector='kafka',
topic='crypto',
privatelink.endpoint='10.148.0.4',
privatelink.targets='[{"port": 9094}, {"port": 9095}, {"port": 9096}]',
properties.bootstrap.server='broker1-endpoint,broker2-endpoint,broker3-endpoint',
scan.startup.mode='latest'
) FORMAT PLAIN ENCODE JSON;
TLS/SSL encryption and SASL authentication
RisingWave can read Kafka data that is encrypted with Transport Layer Security (TLS) and/or authenticated with SASL.
Secure Sockets Layer (SSL) was the predecessor of Transport Layer Security (TLS), and has been deprecated since June 2015. For historical reasons, SSL
is used in configuration and code instead of TLS
.
Simple Authentication and Security Layer (SASL) is a framework for authentication and data security in Internet protocols.
RisingWave supports these SASL authentication mechanisms:
SASL/PLAIN
SASL/SCRAM
SSL encryption can be used concurrently with SASL authentication mechanisms.
To learn about how to enable SSL encryption and SASL authentication in Kafka, including how to generate the keys and certificates, see the Security Tutorial from Confluent.
You need to specify encryption and authentication parameters in the WITH section of a CREATE SOURCE
statement.
SSL without SASL
To read data encrypted with SSL without SASL authentication, specify these parameters in the WITH section of your CREATE SOURCE
statement.
Parameter | Notes |
---|---|
properties.security.protocol | Set to SSL . |
properties.ssl.ca.location | |
properties.ssl.certificate.location | |
properties.ssl.key.location | |
properties.ssl.key.password |
For the definitions of the parameters, see the librdkafka properties list. Note that the parameters in the list assumes all parameters start with properties.
and therefore do not include this prefix.
Here is an example of creating a table encrypted with SSL without using SASL authentication.
CREATE TABLE IF NOT EXISTS table_1 (
column1 varchar,
column2 integer,
)
WITH (
connector='kafka',
topic='quickstart-events',
properties.bootstrap.server='localhost:9093',
scan.startup.mode='earliest',
properties.security.protocol='SSL',
properties.ssl.ca.location='/home/ubuntu/kafka/secrets/ca-cert',
properties.ssl.certificate.location='/home/ubuntu/kafka/secrets/client_risingwave_client.pem',
properties.ssl.key.location='/home/ubuntu/kafka/secrets/client_risingwave_client.key',
properties.ssl.key.password='abcdefgh'
) FORMAT PLAIN ENCODE JSON;
SASL/PLAIN
Parameter | Notes |
---|---|
properties.security.protocol | For SASL/PLAIN without SSL, set to SASL_PLAINTEXT . For SASL/PLAIN with SSL, set to SASL_SSL . |
properties.sasl.mechanism | Set to PLAIN . |
properties.sasl.username | |
properties.sasl.password |
For the definitions of the parameters, see the librdkafka properties list. Note that the parameters in the list assumes all parameters start with properties.
and therefore do not include this prefix.
For SASL/PLAIN with SSL, you need to include these SSL parameters:
properties.ssl.ca.location
properties.ssl.certificate.location
properties.ssl.key.location
properties.ssl.key.password
Here is an example of creating a source authenticated with SASL/PLAIN without SSL encryption.
CREATE SOURCE IF NOT EXISTS source_2 (
column1 varchar,
column2 integer,
)
WITH (
connector='kafka',
topic='quickstart-events',
properties.bootstrap.server='localhost:9093',
scan.startup.mode='earliest',
properties.sasl.mechanism='PLAIN',
properties.security.protocol='SASL_PLAINTEXT',
properties.sasl.username='admin',
properties.sasl.password='admin-secret'
) FORMAT PLAIN ENCODE JSON;
This is an example of creating a source authenticated with SASL/PLAIN with SSL encryption.
CREATE SOURCE IF NOT EXISTS source_3 (
column1 varchar,
column2 integer,
)
WITH (
connector='kafka',
topic='quickstart-events',
properties.bootstrap.server='localhost:9093',
scan.startup.mode='earliest',
properties.sasl.mechanism='PLAIN',
properties.security.protocol='SASL_SSL',
properties.sasl.username='admin',
properties.sasl.password='admin-secret',
properties.ssl.ca.location='/home/ubuntu/kafka/secrets/ca-cert',
properties.ssl.certificate.location='/home/ubuntu/kafka/secrets/client_risingwave_client.pem',
properties.ssl.key.location='/home/ubuntu/kafka/secrets/client_risingwave_client.key',
properties.ssl.key.password='abcdefgh'
) FORMAT PLAIN ENCODE JSON;
SASL/SCRAM
Parameter | Notes |
---|---|
properties.security.protocol | For SASL/SCRAM without SSL, set to SASL_PLAINTEXT . For SASL/SCRAM with SSL, set to SASL_SSL . |
properties.sasl.mechanism | Set to SCRAM-SHA-256 or SCRAM-SHA-512 depending on the encryption method used. |
properties.sasl.username | |
properties.sasl.password |
For the definitions of the parameters, see the librdkafka properties list. Note that the parameters in the list assumes all parameters start with properties.
and therefore do not include this prefix.
For SASL/SCRAM with SSL, you also need to include these SSL parameters:
properties.ssl.ca.location
properties.ssl.certificate.location
properties.ssl.key.location
properties.ssl.key.password
Here is an example of creating a table authenticated with SASL/SCRAM without SSL encryption.
CREATE TABLE IF NOT EXISTS table_4 (
column1 varchar,
column2 integer,
)
WITH (
connector='kafka',
topic='quickstart-events',
properties.bootstrap.server='localhost:9093',
scan.startup.mode='earliest',
properties.sasl.mechanism='SCRAM-SHA-256',
properties.security.protocol='SASL_PLAINTEXT',
properties.sasl.username='admin',
properties.sasl.password='admin-secret'
) FORMAT PLAIN ENCODE JSON;
We have noticed that there is a frequently asked question about the Kafka source: why doesn't RisingWave accept the Kafka consumer group ID? We want to inform you that we are actively working on supporting this feature. You can look forward to using the Kafka consumer group ID with RisingWave soon.